mikescuba
Well-Known Member
- Posts
- 2,733
- Location
- France, Loire, Rhone Alpes
Hi jamesmartin, any idea if a 200 disco T/box would just bolt straight in without the need to drill holes for the hand brake?
Defender Transfer box question
- Thread starter benjy88
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
you have to drill the handbreak bracket to line up with the bolt holes on the box
if i remember its the front bolts , the back ones line up i think
wangie46
Active Member
- Posts
- 963
- Location
- Lakeside Essex
Disco tbox bolts strait on but you have to drill the two holes near the rear output flange and tap to fit the handbrake bracket, m8 I think off the top of my head maybe wrong thou as it was a while ago that I did mine, don't drill to far in thou best way I found was to put the drill bit in the defender tbox to set how deep to drill, the two rear bolt holes are already there.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
on some brackets you can just swap cable ,compare brackets when you get boxes
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
I have a 2.5td transfer box is rattling on tick over. Would similar box work on that?
