Hi All,
After some advice. I've gone through many many threads on both this forum and others and searched and searched, but the problem here is the fact, they all seem to come to a different answer.
I appreciated this topic comes up a lot to, I have read through most of them!
I've been after updating my suspension for a while now, especially as just putting a steering guard and Sumo Bars up front has made the nose droop a fair bit (it's all pretty tired!).
I asked a question a while ago RE. shock and I think I pretty much decided on Single +2 Koni shocks all around (was considering twin Monroe Adverntures all around as I want new turrets anyway!).
So my next stage is the shocks ... I was almost set on Flat Dog Standard Height HD springs ... But I've just found the Famous Four +1 blue's as well. The Flat Dogs look good to me as they give the lb rate and state they are properly sided to unlike other brand springs ... Does anyone know if the FF +1's are properly sided etc?
I've also been going through Red90's page of springs and I'm also considering putting the progressive springs all around, but up front I'm also going to be fitting a fairly heafty winch bumper, winch, lights etc so they need to pretty sturdy up front!
Just after some advice and any experience on this as I feel I'm going around in circles all the time! Want to get it decided and ordered, even if I dont fit until the new year, at least I cant change my mind if its all sat here!
Kind regards to all!
EDIT: Forgot to add, I had planned to run some of the isolator rings with the FD standard height jobs ... One top and bottom most likely all around!
After some advice. I've gone through many many threads on both this forum and others and searched and searched, but the problem here is the fact, they all seem to come to a different answer.
I appreciated this topic comes up a lot to, I have read through most of them!
I've been after updating my suspension for a while now, especially as just putting a steering guard and Sumo Bars up front has made the nose droop a fair bit (it's all pretty tired!).
I asked a question a while ago RE. shock and I think I pretty much decided on Single +2 Koni shocks all around (was considering twin Monroe Adverntures all around as I want new turrets anyway!).
So my next stage is the shocks ... I was almost set on Flat Dog Standard Height HD springs ... But I've just found the Famous Four +1 blue's as well. The Flat Dogs look good to me as they give the lb rate and state they are properly sided to unlike other brand springs ... Does anyone know if the FF +1's are properly sided etc?
I've also been going through Red90's page of springs and I'm also considering putting the progressive springs all around, but up front I'm also going to be fitting a fairly heafty winch bumper, winch, lights etc so they need to pretty sturdy up front!
Just after some advice and any experience on this as I feel I'm going around in circles all the time! Want to get it decided and ordered, even if I dont fit until the new year, at least I cant change my mind if its all sat here!
Kind regards to all!
EDIT: Forgot to add, I had planned to run some of the isolator rings with the FD standard height jobs ... One top and bottom most likely all around!
Last edited:
