Defender seats
- Thread starter tessaj
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DaveM-sport
Active Member
- Posts
- 847
- Location
- Cork, Ireland
Fronts will fit. Rears are slightly different but should fit with abit of work I'm sure
- Posts
- 8,543
- Location
- Tamworth, staffs.
Is it stupid fcuking question wednesday or something today??? :doh:
- Posts
- 8,543
- Location
- Tamworth, staffs.
what colour is your beard?
good question.
Its strawberry blonde
What size is your engine?
goldypurple
Active Member
- Posts
- 206
- Location
- Weeting, Norfolk
front seat will fit, without modification
rears will take a bit of fitting and fabrication of mounts
rears will take a bit of fitting and fabrication of mounts
Grimmer
THE Winner
- Posts
- 13,678
How do I create a reply on landyzone??
Wildmanoborneo
New Member
- Posts
- 38
- Location
- Cheshire
Just had to do the same to my TD5 rear tub to get the forward facing rear seats to fit. Had new arches fabricated and I am just in the process of fitting them. Hopefully finish them this weekend😀
Will post some more pics of the fabricated arches and the fitting tomorrow, when I can get to my PC.
Last edited:
Wildmanoborneo
New Member
- Posts
- 38
- Location
- Cheshire
Tried to post as promised today using the iPad but not happening after an hour. Will get to the PC and post tomorrow, sorry.
WillP
New Member
- Posts
- 76
- Location
- Lewes, East Sussex
Looks great
Wildmanoborneo
New Member
- Posts
- 38
- Location
- Cheshire
Just the carpeting to do now.
Sound deadening and rear seats in. Nearly there! 😆
Sound deadening and rear seats in. Nearly there! 😆
Jam1
Well-Known Member
- Posts
- 1,315
- Location
- Staffordshire
Have you got any pics of them in the stowed away position mate?
the_wolf
Well-Known Member
- Posts
- 16,791
- Location
- Stonehouse, Scotland
Ah I see. Those do look nice but they're not disco seats are they? Brackets are totally different, mine just attaches with 4 bolts
Wildmanoborneo
New Member
- Posts
- 38
- Location
- Cheshire
Wildmanoborneo
New Member
- Posts
- 38
- Location
- Cheshire
No these are the original puma tdci ones as far as I am aware. The arches are different in the new ones from what I understand which is why I had to have the new arches fabricated. Are yours the exmoor trim forward facing because I believe they fit straight in to the existing tub?
the_wolf
Well-Known Member
- Posts
- 16,791
- Location
- Stonehouse, Scotland
Nope. I fitted disco 2 forward facing seats and jam1 was asking why I had to cut my wheelbox to fit them in and he mentioned yours. The ideas similar but the bracket on yours is totally different
Wildmanoborneo
New Member
- Posts
- 38
- Location
- Cheshire
Ah, that will be why then. These are defender 90 CSW forward facing seats. Only found out the arches were different after 2007 once I had the seats. Which is why I had to get the new arches fabricated.
Jam1
Well-Known Member
- Posts
- 1,315
- Location
- Staffordshire
I understood why you cut the boxes wolf I was just wondering if you could get away with just raising them and extending some of the seats metalwork instead
Wildman these must be the most complicated/engineered folding seats I think I've seen, nice fab job on the arches/boxes.
Wildman these must be the most complicated/engineered folding seats I think I've seen, nice fab job on the arches/boxes.
