Defender 110 tdi300 brake issues! help!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Lawfender

New Member
Posts
44
Hi all,

New to the landyzone and landrovers also. Wondered if anyone can help..
I have recently bought a defender 110 on an M plate. I had to replace the brake servo as soon as i got it cos it was split. That did the trick and my brakes were fine, now after a month ish the brake pedal is solid and I have pretty much no braking whatsoever! Can anyone help on this?
Much appreciated!

:blabla:
 
Hi all,

New to the landyzone and landrovers also. Wondered if anyone can help..
I have recently bought a defender 110 on an M plate. I had to replace the brake servo as soon as i got it cos it was split. That did the trick and my brakes were fine, now after a month ish the brake pedal is solid and I have pretty much no braking whatsoever! Can anyone help on this?
Much appreciated!

:blabla:

Sounds like your vaccuum pump is fecked. Pull the pipe off the servo with the engine running and test for a vaccuum. If there is none present then replace the pump. They are about £70-£80.
 
yeh was my vacuum pump,managed to get second hand one for 50quid.fitted her and all is good.many thanks
 
Back
Top