Decender 2.5na alternator. Help!! (Jamesmartin lol)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

flat

Well-Known Member
Posts
9,075
Location
Far away from you!!
Guys, bit of an issue in that my alternator has broken it's casing. Easy switch I though.

Well 3 different alternators later from my local parts place and I still don't have anything working. 1st one the inner spindle was to big to accept my fan and pulley and the 2nd and 3rd had fan clearance issues and the pulleys didn't line up (by quite a bit!)

My alternator looks like this

RTC5084N 17ACR ALTERNATOR ASSEMBLY | shop | www.lrseries.com


But I don't know of that is exactly the same as mine as it appears to be for a series 3.

My Landrover is a 1991 ex-MOD 2.5na defender 90.
I measured the distance from the faceplate to the outer edge of the puller which was 40mm

Does anyone know what alternator would be correct? I do t know what amps my one is and have seen lots of different options online.

Is it possible to get a suitable alternator with fan and pulley attached already? How would I know if the pulleys will line up?

Hopefully James Martin will see this and give me a part number!

Cheers

Ed
 
That one on LRSeries is 34amp

Going to look for a 45amp one with fan and pulley already on it.

I suppose I can alter the pulley lining up slightly by physically moving the alternator should I need to.

Or will a 35a alternator do? I have no extra lights and am not going to fit any, I don't even have a radio!
 
That one on LRSeries is 34amp

Going to look for a 45amp one with fan and pulley already on it.

I suppose I can alter the pulley lining up slightly by physically moving the alternator should I need to.

Or will a 35a alternator do? I have no extra lights and am not going to fit any, I don't even have a radio!

you get sized washers to align pulley, personally id get the 2.5 alt and new pulley if needed
 
It's identical to that one on LR series.

Mine has no markings or letters/numbers anywhere. Just says Lucas on the case. Found a few at various places with pulley and fan included - will try one of them :)
 
Back
Top