D3 handbrake not functional error message

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

Mavisamy1

New Member
Posts
4
Location
England Warwickshire
Hello all 2008 disco 3 2.7 tdv6 handbrake stuck on have since manually released it stripped all parts cleaned regreased put back together. Check e.p.b module & rewound & relatched cables. Now nothing when turn ignition on it says handbrake fault. When you press button it says handbrake system not functioning. Any help would be so appreciated.
 
Mavisamy1 said:
O.k will try to find someone who can help unless you know of anybody?. I'm abit new to land rovers & haven't a clue where is best to go or which garages to trust.
Click to expand...

hi

No sorry I don’t, have my own diagnostics , which with these vehicles is really useful to have

enclosed some links which also may help , just in case u may have missed something

https://www.disco3.co.uk/forum/epb-repairunjam-relatch-91299.html?highlight=Epb

https://www.disco3.co.uk/gallery/albums/userpics/11748/Bodsys_Brake_Bible_V1_6a_CompressPics.pdf

Plus , always nice for a newbie to Pop over to the introduce section

have u also checked ur belts and oil pump cover has been done, very important if u wasn’t aware

hope that helps
 
You must log in or register to reply here.

Similar threads

DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
1K
DollyBird
DollyBird
Blob
L322 (Not your usual) battery drain
Replies
7
Views
2K
Datatek
Datatek
A
Freelander 1 P0480 error code - fans not working - where is sensor and relay???
3 4 5
Replies
82
Views
14K
Arnodafe72
A
sheddysheard
Disco 3 (LR3) Limp mode with codes P138E and P132B
Replies
7
Views
8K
sierrafery
sierrafery
sheddysheard
Sport Limp Mode P138E and P132B
Replies
2
Views
2K
sheddysheard
sheddysheard
Back
Top