D2 TD5 ECU/Non start help.

Good Evening Ladies and Gents,

I know how frustrating seeing these topics can be, I have trailed through next to every single non start thread on the search facility so far.

I need a little help before I end up looking my mind and selling my D2 spares and repairs.

I currently have a TD5 d2 that has been Kangerooing in every gear at around 2K.
-cleaned red plug and ecu
-I free'd up the Westgate actuator.
-Did the modulator bypass mod.
-Tested The MAF and also tried with it unplugged.
-changed injector harness.

After this it ran perfectly for 2 days and then started to kangaroo again.

A day or so after the Kangaroo re appeared I lost all power, slowly came to a stop where I lost electrical power.

The instrument cluster then lit back up so I tried to start it however it will only crank.

I have since then, check all fuses.
Checked in getting fuel pump to the filter.
Checked CPS wiring.

I have had a diagnostics machine on it, it will read airbag and and but not engine ecu.

I'm at my whits end with it and really need some advise/help.

Jack

The first thing would be to check there is power to the engine Ecu and the earths are there too, pin data should be a diagram on this site or use rave