cup holders on facelift

teddywood1 · Feb 24, 2013

:crazy_driver

oes anybody know if you can take the cupholders out, that are in the facelift model ,and refit just a small tray , the cupholder are useless as cup holder as the handles of both cups meet in the middle, i have some mugs that the bottom rim is near same size as the top of the cup holders so they sit on top, but the other day we went out and forgot to put them in , we had just ordinary mugs and nearly spilt the lot .LR does design some stupid things. here is hoping sombody has a fix for them, i did think of shaping a thin piece of wood and painting it black to match .

frontosa · Feb 24, 2013

i was going to cut a bit of plastic, from some left over upvc fascia board and spray it black. quite agree the cup holders are rubbish and make the dash look naff.

Pikey · Feb 24, 2013

teddywood1 said:
:crazy_driveroes anybody know if you can take the cupholders out, that are in the facelift model ,and refit just a small tray , the cupholder are useless as cup holder as the handles of both cups meet in the middle, i have some mugs that the bottom rim is near same size as the top of the cup holders so they sit on top, but the other day we went out and forgot to put them in , we had just ordinary mugs and nearly spilt the lot .LR does design some stupid things. here is hoping sombody has a fix for them, i did think of shaping a thin piece of wood and painting it black to match .

To be fair they are designed for 330ml drinks cans. get the tapered insulated mugs.

Freelaner · Feb 24, 2013

my pre facelift has em int door card and adjusts to whatever drinks container is placed in it.

the insulated cup fits perfect too

Singvogel · Feb 24, 2013

Depends on the shape and size of your mugs of course - but I've had no probs with them.

As said the tapered insulated mugs and standard coke cans fit fine.

teddywood1 · Feb 25, 2013

but why o why did they put them as the handles meet together

Singvogel · Feb 25, 2013

teddywood1 said:
but why o why did they put them as the handles meet together

Probably 'designed' by the same half-wit as put the fuel-pump and filter in the rear wheel-arch.

Have you tried taking the liner/adapter out so that your mug sits deeper in the recess. Wont help with the handle problem of course.

teddywood1 · Feb 25, 2013

yep tried that and i do not like the insulated mugs it has to be a pottery one for me ,as i am old fashioned and live in the potteries ,also i can not drink coke as i am diabetic amoungst other things i will come up with somthing and let you know. but thanks for the input

hd3 · Feb 25, 2013

you could take the cupholders out .. ..
then take the pottery mug .. 'n wrap something like camping-mat foam around them ..
so that they sit solid in the cupholder tray thing ..

or remove the cupholder tray altogether ( 1 screw ) .. and design your own from scratch ..

~~~~~~~

but do consider what damage a pottery mug could cause , should you be involved in an accident.
it could become a lethal bit of 'shrapnel' flying about the cab ..

teddywood1 · Feb 26, 2013

i never drive with a mug in the cup holder it is only when i am stoped , i do not like getting points on my license ,if there was anything in it the blues and two's boys might think i am drinking it

nickcc · Feb 26, 2013

Carlsberg special cans fit a treat

Singvogel · Feb 26, 2013

nickcc said:
Carlsberg special cans fit a treat

No No - this is very dangerous.

Any slurps/spills from the can are liable to make the steering-wheel initially slippy and then sticky.

It's much easier to drink from a stubby Tuborg bottle.

They fit even better.

DD3 · Feb 26, 2013

Another riveting thread - cup holders! come on guys?

nickcc · Feb 26, 2013

Just a bit of light relief.

hd3 · Feb 26, 2013

The History of the Car Cup Holder: BA Daily: bonappetit.com

" Stella Liebeck, a 79-year-old woman, sued McDonald's for damages after spilling 180-degree coffee on her lap in a stationary car. She got third-degree burns from the spill, and was awarded $2.7 million (reduced to $640,000 on appeal) by the jury. The case became fodder for endless Leno monologues and a national argument about tort reform, but it was also a strong argument for industry-wide adoption of the cup holder--if the car she'd been sitting in, her grandson's Ford Probe, had had even one single cup holder, the whole ordeal might have been avoided. "

~~~~~~

" Cup holders aren't just essential for our constant hydration, they're also the source of our psychological well-being on the road: Clotaire Rapaille, a cultural anthropologist, has theorized that having warm liquid close by in the car brings our subconscious back to the safety of early childhood, and the food-love of our mother's milk. "

Brack · Feb 26, 2013

Freelaner said:
my pre facelift has em int door card and adjusts to whatever drinks container is placed in it.

the insulated cup fits perfect too

literally whatever drinks container too - 2 litre pop bottle even fits in there

Singvogel · Feb 26, 2013

DD3 said:
Another riveting thread - cup holders! come on guys?

Aha - at last a rivetting thread. I've been waiting years for this.

Snap-head, pan-head, flat-head, coutersink-head, even blind 'pop'-rivets.

I could write a Phd Thesis on them.

Please state the required particular area of interest before I continue.

DD3 · Feb 26, 2013

Singvogel said:
Aha - at last a rivetting thread. I've been waiting years for this.

Snap-head, pan-head, flat-head, coutersink-head, even blind 'pop'-rivets.

I could write a Phd Thesis on them.

Please state the required particular area of interest before I continue.

I loves my pop riveter, but not owning a Def nothing to rivet!!

My Fleabag has a pop, yes 'pop open' cup holder on the dashboard but its screwed in not rivetted

Been researching the BMW 330. Fine engine, loads of power blabla, but cant find anything on the cup holders - Help!!!

teddywood1 · Feb 26, 2013

Singvogel said:
Aha - at last a rivetting thread. I've been waiting years for this.

Snap-head, pan-head, flat-head, coutersink-head, even blind 'pop'-rivets.

I could write a Phd Thesis on them.

Please state the required particular area of interest before I continue.

i have been around the pan head LOL in america

Singvogel · Feb 26, 2013

nickcc said:
Just a bit of light relief.

I need light relief - these energy bulbs are rubbish!

cup holders on facelift

Well-Known Member

Active Member

Dummy Ejection Facilitator..

Landy Driver

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Similar threads