cream leather

chip2366 · Jun 1, 2010

hi all i have just fitted a full cream leather interior to my p38 2.5 dse and the wiring loom has been changed for the 1 out of the vogue p38
the problem i have is that non of the electrics work any help would be nice thanks

MudHunter · Jun 1, 2010

cream leather? in a landrover? thats like doing an oil change in ur tux

j the range · Jun 1, 2010

it will depende on your becm, it needs to have a h. on it, it will allso need setting up to move the seats..

Irishrover · Jun 1, 2010

There are a couple of leads that are in the Becm harness if the seats are electric and memory. One is a small black square plug which is located below the becm fuses to the extreme left. The other is a green plug located on the opposite side of the becm (Nearest the floor tunnel) at the extreme left.
As already posted you also need the "H" level becm...have a look on the label above the fuses to see which version you have..there will be either a "H" or "L"

The Mad Hat Man · Jun 2, 2010

sandeep2 said:
You should go for a experienced mechanic to solve your problem, everyone here can only give you suggestions and if you are not do it nicely you will be caught by a big problem so go for the relevant person he will solve everything........

wtf!
I dont think this is your type of forum

Here we try and help peeps, not turn them away. :doh:

chip2366 · Jun 3, 2010

can i just change my becm to the one out of a doner car or will i have to have it programed some how thanks

cream leather

chip2366

Member

MudHunter

Active Member

j the range

New Member

Irishrover

Well-Known Member

The Mad Hat Man

Well-Known Member

chip2366

Member

Similar threads