Crankshaft pully nut size 2.5N/A

D

discomania

Well-Known Member

Posts

6,949

• Mar 27, 2007

• #1

I want to get a socket for my crank pully on my 2.5NA so I can turn the engine over to do the valves, does anyone know what size it is?

 

GRUNT

Well-Known Member

Posts

8,911

Location

On the lake Geneva shoreline.

• Mar 27, 2007

• #2

1&5/8"AF. I could only get one with a 3/4" drive so had to get a 3/4"-1/2" reducer.

Thats for a 2.5Turbo.

 

D

discomania

Well-Known Member

Posts

6,949

• Mar 27, 2007

• #3

Aye that will do, cheers, I will see if I can get a 1/2 so it goes straight on the 2foot power bar, failing that a reducer indeed.

 

C

CharlesY

Well-Known Member

Posts

7,084

Location

BANNED

• Mar 28, 2007

• #4

Why not measure it across two opposite flats, using a caliper?
We can do that next time you're out here!
CharlesY

 

P

pyrotecnic

Member

Posts

18

Location

bucks

• Mar 28, 2007

• #5

I agree with GRUNT. I was told you can only buy these sockets in 3/4.

 

C

CharlesY

Well-Known Member

Posts

7,084

Location

BANNED

• Apr 8, 2007

• #6

Inch and five-eighths AF it is, in decent Christian Imperial sizes.
That's 42.5 mm in funny foreign size.

At that size a half-inch square drive should be able to be found.

 

E

eightinavee

Well-Known Member

Posts

3,956

Location

UK.

• Apr 8, 2007

• #7

If your 2.5 is in a 5spd 90,all you need to do is stick it in 5th gear and jack the LH front wheel just clear of the ground.Then you can turn the wheel with your foot to get the engine to turn to exactly where you want it.