Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Is the crank position sensor like the MAF where is better to buy original rather than aftermarket? Given the price difference between the two I thought I'd ask first 
Disco 2 Crank Position Sensor
- Thread starter Shimsteriom
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
No opinions on this?
- Posts
- 71,385
- Location
- Back in the Room
Is the crank position sensor like the MAF where is better to buy original rather than aftermarket? Given the price difference between the two I thought I'd ask first
Go OEM... Not worth the hassle to keep replacing it ...
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
Dammit, I knew someone would say that Was hoping to hear that the aftermarket ones were just as good as I'm on a budget at the moment after buying new clutch and flywheel.
Was hoping to hear that the aftermarket ones were just as good as I'm on a budget at the moment after buying new clutch and flywheel.
- Posts
- 71,385
- Location
- Back in the Room
Dammit, I knew someone would say that
Well, that's just my opinion ...
others maybe different ...
sierrafery
Well-Known Member
- Posts
- 18,317
- Location
- Arad/Romania
GENUINE only on that one, i've seen aftermarket which didnt work well from new
Feathers McGraw
Well-Known Member
- Posts
- 2,780
- Location
- Cumbria
Seconded!
bankz5152
Well-Known Member
- Posts
- 9,405
- Location
- South London/North Kent
Genuine only, It's the only thing that will stop a TD5 working properly. Got mine from here for a hefty discount, infact 4x cheaper than the Dealer and 3x cheaper than my other 4x4 Garage.
http://www.ebay.co.uk/itm/262145365358?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I fitted a small nitrile o-ring on as well help seal out the muck etc..
http://www.ebay.co.uk/itm/262145365358?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
I fitted a small nitrile o-ring on as well help seal out the muck etc..
Shimsteriom
Master Procrastinator
- Posts
- 41,905
- Location
- Over Here
So, OEM it is then.
Thanks for the feedback, I appreciate it.
Thanks for the feedback, I appreciate it.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Is this a part you can feel / measure to know it is going wrong or is on the way to failure? Do you get a warning it is going to fail?
Cheers
