R
Richard
Guest
Well, I managed to get the screen out with no trouble. The
seal was so perished it just fell apart so a gentle push
from inside and the screen was in the hands of number two
son.
Much cursing and muttering later the new seal was round the
old screen and a piece of bailing twine inserted in the
other side - we were ready for the next bit.
Offered the screen to the hole and with a nudge it settled
back enough to get the seal over the lip so that the twine
could be pulled. We aborted this attempt as the screen was
too much of centre. However, our confidence had grown as we
could see how it all worked.
Offered up a second time (much better) and pulled and
pulled. The screen settled back nicely. Smugly we tugged the
twine for the last couple of inches. Yep, Autoglass come
tomorrow with a nice new tinted screen.
Well at least we tried!
Regards,
Richard