- Posts
- 11,020
- Location
- North of the Wall
I've taken the rear quarter panels off the tub, but when i put the new ones on the did not fit. They are too high, so the curve in the rear side panel doesn't line up and the panel itself does not hang far enough down to the rear cross member. The part numbers of the panels are STC1854 & 1855. These seem to be correct.
Here is the problem
That shoulder fits in to the inner wheel arch, but because the new black one is longer it pushes the whole thing nearly an inch up over.
could these panels have been put in the wrong box under the wrong part number? are series ones slightly different?
Here is the problem
That shoulder fits in to the inner wheel arch, but because the new black one is longer it pushes the whole thing nearly an inch up over.
could these panels have been put in the wrong box under the wrong part number? are series ones slightly different?