cooling system bleed plug replacement

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Maddogtrev

Maddogtrev

Member
Posts
48
Location
Darlington
Hi I have spent the day doing a service and replacing the timing belt on my 300tdi I also replaced the P gasket so had to refill the cooling system.
I did a search on the forum and have replaced the bleed plugs with central heating radiator bleed valves. One in the radiator and one in the thermostat housing. It made bleeding the system a lot easier I used the ones with the rubber O ring and square bleed screw in the middle.
I was just interested has any one used the same plugs for any length of time and how good they are or has any one had any problems with them????:confused:
 
Thanks for the quick reply Hifly have just put mine in and we are going on holiday Saturday and will be doing 318 miles to Minehead for 2 weeks holiday and of coarse 318 miles back and all the running around in between so just putting my mind to rest they will be ok many thanks
 
Maddogtrev said:
Thanks for the quick reply Hifly have just put mine in and we are going on holiday Saturday and will be doing 318 miles to Minehead for 2 weeks holiday and of coarse 318 miles back and all the running around in between so just putting my mind to rest they will be ok many thanks
Click to expand...

They're a vast improvement on the original
 
Ok had alook went back to try putting some photos up and this time got the following message Your submission could not be processed because a security token was missing whats this mean ??
 
Ok so hopfully my photos have uploaded now the bleed plugs are so easy to fit and bleeding a hot engine is much easier and are avalable at most pluming supply stores


HolsMinhead048.jpg
[/URL][/IMG][/IMG][/IMG][/IMG]
HolsMinhead049.jpg
[/URL][/IMG]
 
no we used the one on the harbor calls its self a tea room but do a good breakfast
we also got to drive a few lanes on the moor just above Minhead
still strugling with me photos seems a bit hit and miss I'll get there
 
Maddogtrev said:
Hi I have spent the day doing a service and replacing the timing belt on my 300tdi I also replaced the P gasket so had to refill the cooling system.
I did a search on the forum and have replaced the bleed plugs with central heating radiator bleed valves. One in the radiator and one in the thermostat housing. It made bleeding the system a lot easier I used the ones with the rubber O ring and square bleed screw in the middle.
I was just interested has any one used the same plugs for any length of time and how good they are or has any one had any problems with them????:confused:
Click to expand...


I sell em as kits on fleabay. Only prob I have had is one guy that said they didnt fit?? :confused:.

Rings tend to be cut if removing the whole assy very often.

Dont need both with bleed screw - one bleed screw & onr blanking plug, for rad.
 
You must log in or register to reply here.

Similar threads

G
Bleeding coolant system
Replies
3
Views
526
Nodge68
Nodge68
L
Disco 2 brake question
Replies
5
Views
231
landynutterme
L
S
Starting issue. Fuel system bleed
Replies
8
Views
1K
sjr202
S
S
Series 3 Diesel fuel bleed / starting issue
Replies
7
Views
1K
sjr202
S
Rich W
Disco 2 TD5 camshaft rotation torque
Replies
5
Views
337
Rich W
Rich W
Back
Top