TwinsDisco
New Member
- Posts
- 6
- Location
- Miami and The Everglades
Cheers to all
I removed the front cross member bar for better access to the oil pan, since I was going to work on the front cover.
I had previously removed the exhaust and intake manifolds.
Because of the weight of the cats, two things happened:
_ The Oxygen sensors cables disengaged from the connectors, see pictures below.
_ Muffler got disengaged from the front side of the system.
I need help in connecting things back together, I know I could buy new O2 sensors, which I'll soon. Would like to learn how to reconnect these.
I sincerely appreciate and thank you all for your time and knowledge.
Merry Christmas
I removed the front cross member bar for better access to the oil pan, since I was going to work on the front cover.
I had previously removed the exhaust and intake manifolds.
Because of the weight of the cats, two things happened:
_ The Oxygen sensors cables disengaged from the connectors, see pictures below.
_ Muffler got disengaged from the front side of the system.
I need help in connecting things back together, I know I could buy new O2 sensors, which I'll soon. Would like to learn how to reconnect these.
I sincerely appreciate and thank you all for your time and knowledge.
Merry Christmas
Attachments
Last edited: