connector the diagnostic with a spark

have connector the diagnose with a spark on the connect cable, so the diagnose is not working anymore , no live wire to the diagnose cable { to the diagnostic ) anymore, , have check all the fuse in the fusebox and the becm but cnnot find a broken fuse , what should I check now , have already check the Becm and the motor electronic module , No smell of anyburn ,,,

Have the wires broken off the diagnostic connector. They do suffer from corrosion.

Check the rear of the obdII socket where you plug the connecting cable into. They have been known to corrode causing problems

Fuse 33 engine bay fuse box is power to data link connector. (OBDII socket)

problem now ,,, is NO LIVE wire to the diagnostic ,,

shall check the fuse in the fusebox again tomorrow ,

cheongthong said:

problem now ,,, is NO LIVE wire to the diagnostic ,,

Click to expand...

The live wire to pin 16 diagnostics socket is fed from Fuse 33, 5 amps, if that has not blown the wire must be disconnected from the OBDII socket. Or broken elsewhere.

wammers said:

The live wire to pin 16 diagnostics socket is fed from Fuse 33, 5 amps, if that has not blown the wire must be disconnected from the OBDII socket. Or broken elsewhere.

Click to expand...

is there a echo in here

wil2813 said:

is there a echo in here

Click to expand...

Yes, his name is emphasis.

thank wammers fuse 33 is blown , but trouble come again, instrument panel flash show fuse 12.13.14.15,,,, but this fuse are all in order,, the sunroof is also not work anymore ,,

CATCH NO BALL AGAIN,,