Confused fitting suspension

[JP] · Oct 8, 2011

quick one gents....

just finished fitting one side and the bottom of the damper is touching the axle? this shouldnt be like this should it?

I havent even tighten it much... should I slack it a bit till it doesnt touch the axle?

Trewey · Oct 8, 2011

I'd cut 1/8" off the bottom of the protruding thread.

sible88 · Oct 8, 2011

Yeah I cut mine down a bit with an angle grinder.

jai_landrover · Oct 8, 2011

Yea as above many shocks do not fit std.

[JP] · Oct 8, 2011

bollocks! that means taking it off! Nooooooooooooooooooooooo

[JP] · Oct 8, 2011

actually what I'll do is cut it off with a blade off a metal hacksaw... cant really be ****ed to get the whole thing out again

lazydog · Oct 30, 2011

[JP];1641551 said:
actually what I'll do is cut it off with a blade off a metal hacksaw... cant really be ****ed to get the whole thing out again

Exactly the same as the ones I have just fitted but I am waiting for M&M to get back to me to confirm if I cut it off will they still honour the warranty,as i have bought 2 sets for the 2 discos 1 set has been fitted and the other is still waiting for a burst of energy!
They said verbally to cut it off but am waiting for it in writting just in case!

Langers · Oct 30, 2011

Same here with my Terrafirma kit, had to cut about 1/2" off front shock studs.

Confused fitting suspension

[JP]

New Member

Trewey

Cockernee, Pasty munchin bastid.

sible88

New Member

jai_landrover

Well-Known Member

[JP]

New Member

[JP]

New Member

lazydog

Well-Known Member

Langers

Well-Known Member

Similar threads