Cold Air Feed

pos · Nov 29, 2009

Hello,

I just need a few other tid bits to complete my 200TDi conversion now. A length of Cold Air Feed pipe / ducting between my turbo and air filter is one of them. Does anyone know what diameter pipe I require for this? I.e. what is the diameter of the turbo inlet?

Here's a great ebay site that sells them:
eBay.co.uk Shop: Search results for Auto Performance Silicone Hoses.

Cheers
-pos

iannotts · Nov 29, 2009

I used the one off the TD

pos · Nov 29, 2009

Yes, but my N/A doesn't have that length of pipe because it didn't have all the turbo system to pipe air around

Do you know the diameter of the length of pipe between the air filter housing and the turbo inlet? I think it's 63mm but I want to be sure!

-Pos

Patman1200 · Nov 29, 2009

errrr, don't want to be stoopid or nuffin, but can't you measure it as you don't have the pipe on the turbo inlet yet?
Mines already fitted and stuffed under all the pipework so I'm not going to remove it to measure it ;-)

pos · Nov 29, 2009

Patman1200 said:
errrr, don't want to be stoopid or nuffin, but can't you measure it as you don't have the pipe on the turbo inlet yet?
Mines already fitted and stuffed under all the pipework so I'm not going to remove it to measure it ;-)

I can do tomorrow yes. My landys locked away down at the specialists so I can't get to it tonight. I was jut wondering if somone knew the dimensions so that I could find the right pipe tonight, ready to order first thing tomorrow morning =) I should have measured it yesterday when I had chance :doh:

Cold Air Feed

pos

Well-Known Member

iannotts

New Member

pos

Well-Known Member

Patman1200

Active Member

pos

Well-Known Member

Similar threads