clutch failed.

generaldogsbody · Nov 16, 2013

Clutch failed,was fine no bangs or noises.I went to change gear,felt the pressure and then it went straight down to floor.No fluid leaks,no bubbles in reservour when you pump it.Tried bleeding it,seems to push air and fluid out of bleed nipple but won't pressurise.Is it the master ,or slave cylender.Any ideas.cheers .

jamesmartin · Nov 16, 2013

replace both, but first remove slave and check it and rod which will indicate if release lever is split or ok

Craiggillin1985 · Nov 16, 2013

Sounds like master but check pipe makes sure it's not chaffed on chassis

generaldogsbody · Nov 17, 2013

Even if one of the clutch master or slave servo's has failed,should the pedal come back up anyway.

jamesmartin · Nov 17, 2013

generaldogsbody said:
Even if one of the clutch master or slave servo's has failed,should the pedal come back up anyway.

they have an over center assist spring which makes pedal stay down once pressure in systems lost

generaldogsbody · Nov 17, 2013

Thanks everybody,gonna get it jacked up in the morning.

clutch failed.

generaldogsbody

Active Member

jamesmartin

Well-Known Member

Craiggillin1985

New Member

generaldogsbody

Active Member

jamesmartin

Well-Known Member

generaldogsbody

Active Member

Similar threads