It's a deep clunk. Can do it more than once when pulling away
Do you mean Haldex module
Presume so. Quoting what's in the invoice
SUPPLY AND FIT SHORT HARNESS FROM REAR DIFF CONTROL MODULE TO MODULE ABOVE AXLE Check and report on no comms to rear diff control module, confirmed, traced wiring to rear differential control module, confirmed found broken wire at plug, unable to repair, requires short harness from rear differential control module to above axle
The plugs to both the rear diff and Haldex need to be checked regular, they are prone to damage being in the area they are, may re-force the wiring by using some tape.
Ain't that a bad design! Defo going under to tape them up!The plugs to both the rear diff and Haldex need to be checked regular, they are prone to damage being in the area they are, may re-force the wiring by using some tape.
1
2
Yes trace the wires back and tape up for extra support and to stop chaffing etc.
Great, where does the other end plug into is it in the boot somewhere? I want to put a volt meter on either end to check for continuity. ThanksThe plugs to both the rear diff and Haldex need to be checked regular, they are prone to damage being in the area they are, may re-force the wiring by using some tape.
1
2
Cheers mate now I know I can just buy a harness I just need to know where the other end plugs in, Thanks
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
