clonking sound

shealyp38 · May 17, 2014

hi gys
been having a small problem with my 99 v8 p38 lately
there is a clonking sound which sounds like its coming from the transfer box
its there when pulling away and noticed today while going through the gears high and low ratio its there also,the car was stationary while doing this.
which kind of ruled out my original theory that the suspension was to blame
now could it be the transfer box?
and how would i tell if it is on its way out

regards
steve

Saint.V8 · May 17, 2014

Possible wear in the propshaft UJ's.....

how long has it been since you packed these with grease??

shealyp38 · May 17, 2014

never knew you could grease them so
ill have to get a grease gun first

Saint.V8 · May 17, 2014

shealyp38 said:
never knew you could grease them so
ill have to get a grease gun first

Rule No.1 -Know your nipples

as attached....

Datatek · May 17, 2014

I'd do a careful check of the UJ's before you drive it again. If one lets go it can be expensive as in smashed gearbox casing,

shealyp38 · May 17, 2014

right im off to grease them up ill let you know the outcome

shealyp38 · May 17, 2014

well ive checked the uj's and no play in them,all greased up and noise still there so look somewhere else now

PPP38vouge · May 17, 2014

shealyp38 said:
well ive checked the uj's and no play in them,all greased up and noise still there so look somewhere else now

Hi,
A friend of mine had same problem, turned out to be stretched chain In transfer box.

clonking sound

shealyp38

New Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

shealyp38

New Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Attachments

Datatek

Well-Known Member

shealyp38

New Member

shealyp38

New Member

PPP38vouge

Active Member

Similar threads