chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
is there any specified cleaner for injections to my p38 hse ?
cleaner for injections ( p38 ) 1996 hse
- Thread starter chabrolly
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wills
Well-Known Member
- Posts
- 1,209
- Location
- Northamptonshire
If you aren't taking them out and running an additive through then I would use REDEX. I already use this every 10ish tankfuls on my P38. Don't know whether it makes a difference but I dont think it does it any harm 
Then again im a sucker for conspiracies! I only ever fill up with BP fuel if possible, don't trust ANY supermarket fuel.
-Wills
Then again im a sucker for conspiracies! I only ever fill up with BP fuel if possible, don't trust ANY supermarket fuel.
-Wills
chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
like what ?
- Posts
- 1,855
- Location
- Selby, North Yorkshire
Millers Diesel additive seems to make my vehicles run quieter and smoother. I's about 8 squid a bottle and lasts ages if you do exactly what it says on the tin.
chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
is it just for diesel ? because my rangie is a hse !
Take5
New Member
- Posts
- 2,403
- Location
- Harrogate or France
Yes, that's for diesel injectors. I would go with either Redex Injector cleaner, or Wynns injector cleaner. Empty the bottle into your fuel tank then fill it to half full and drive normally. Next time you fill up all will be fine.
chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
what do you think about wynns ? i can find it nearby ...
i'm suffering with my rangie ... he's losing power , especially while going up ...
Have a look at this topic i have just done
http://www.landyzone.co.uk/lz/f10/different-fuels-58606.html
At the end of the day, will wynns redex etc, take carbon deposits off? carbon is pretty tough stuff, but i know it can be dissolved but will it get all of it, maybe a good start is to first take the injectors out, clean them of all deposits, and then start to use an additive, to keep them that way, additives are probably cleaning other parts you cant get to as well, but if you look at the link i put up, that's already being done (with the right fuel)
http://www.landyzone.co.uk/lz/f10/different-fuels-58606.html
At the end of the day, will wynns redex etc, take carbon deposits off? carbon is pretty tough stuff, but i know it can be dissolved but will it get all of it, maybe a good start is to first take the injectors out, clean them of all deposits, and then start to use an additive, to keep them that way, additives are probably cleaning other parts you cant get to as well, but if you look at the link i put up, that's already being done (with the right fuel)
chabrolly
Active Member
- Posts
- 432
- Location
- LEBANON - mediterranean sea
