classic rr problem
- Thread starter pete@her
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
oil dripper
Well-Known Member
- Posts
- 5,659
- Location
- Here i think
as anyone come across this before,clunk from frount end when turning left or right sounds like drive shaft or bearings but i have had both sides off ,but both ok,i cant feel any movement in prop,t rod ends look ok .cheers
i had this on one of my rangies turned out to be a bottom swivel bearing was buggered
blackvoguebeauty
Active Member
- Posts
- 191
- Location
- Hereford
Could be the radius arm bushes/bolts, they can work slightly loose and cause a clunk. Try tightening those and see what happens. Probably worth putting new bushes and bolts in. Cheap and easy job.
blackvoguebeauty
Active Member
- Posts
- 191
- Location
- Hereford
Lie underneath and watch the radius arm bushes while someone rocks the car. You might even be able to hear a clunk. A bolt was rusted in on mine and knackered the bush.
