Classic dash lamps and abs :-(

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

neiltce

New Member
Posts
434
Location
Runcorn
Hi peeps,
I'm having some issues with the abs on my classic,
It's got new brake disks, and pads all round, cv joints, radius arm and roll bar bushes, hub seals, the list goes on, even another engine,

Now the abs is playing up, and when braking it pulls to the left bad, the abs pump works fine but garage says either it is faulty or the controller, pump runs for a minute maybe when turning the ignition on, then stops, it then runs intermittently so seems ok to me..

The thing is when ingnition is turned on I only get oil light, battery light, and glow plug light, should there be any others come on at this time ???

Any help will be gratefully received ..

I have now spent £2900.00 on the car and I can't continue at this rate. I only got it in January ...

Thanks ... Neil..
 
Right so, I have found out about the abs light, seems there maybe more trouble ahead..

Someone may have removed the abs bulb or removed a fuse because they didn't want to try and repair the ABS. So I would check fuses and check for a bulb (perhaps the bulb has blown?). If all is present, then I guess it will be out with the multimeter;if you can get the ABS light working you should then be able to get a blink code which will give you some idea where to start troubleshooting.
 
Someone may have removed the abs bulb or removed a fuse because they didn't want to try and repair the ABS. So I would check fuses and check for a bulb (perhaps the bulb has blown?). If all is present, then I guess it will be out with the multimeter;if you can get the ABS light working you should then be able to get a blink code which will give you some idea where to start troubleshooting.

That's my plan now,
any ideas what bulbs are in the dash, been looking on Internet, rave etc but can't find any info, would like to go buy a load of them and do them all at once...
 
Back
Top