Chequer plate door cards?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
scott02464

scott02464

Active Member
Posts
710
Location
Up North!
Hi,

Im wanting to repalce my tatty door cards on my defender with chequer plate as they will be much easier to clean and would give a much better look than my originals.

Iv had a look round the internet and can only find the chequer plate for a rear door and not the side doors!

Can anyone point me in the right direction please?

Cheers, Scott
 
I agree leave the chequer plate to the out side if anywhere. (I have it on my front wings that's only because I messed my wing tops up taking my bonnent off a million times!!)
 
Tho not to my taste, im pretty sure no one makes them but im sure it wouldnt be hard, couple of hours with a grinder and your done. If your going for cleanability here plain ally or stainless sheet might be a better option here.

Ollie
 
Went in the bogs in a Newquay pub today and the whole of the cubicle was made of chequer plate. I thought I was having an Acid flashback & having a bad trip Bog is probably the best place for the stuff
 
There's nothing wrong with a little bit of chequer plating used in moderation. In fact, the inside of you doors is probably a good place to have it, as long as it's black so it doesn't stick out like a sore thumb. You'll be able to kick the door open Arnie style straight through into the car next doors window.
 
scott02464 said:
Hi,

Im wanting to repalce my tatty door cards on my defender with chequer plate as they will be much easier to clean and would give a much better look than my originals.

Iv had a look round the internet and can only find the chequer plate for a rear door and not the side doors!

Can anyone point me in the right direction please?

Cheers, Scott
Click to expand...

Don't do it. It will be like having a cheese grater strapped to your doors.:doh::doh::doh:

Everytime you turn a corner you will remove another slice of skin.:rolleyes:
 
Not to mention the heat retention and glare in the sun and the additional weight to the hinges. Bloody daft idea! Thinner ali might be better, or maybe some fur.....
 
do a search , thers a guy advertising some on hear earlier in the year , bout jan / feb time, think he was pressing them out his self
 
You must log in or register to reply here.

Similar threads

adyw
Door card fittings
Replies
1
Views
326
dag019
dag019
K
What money should I be asking?
Replies
18
Views
635
Anaconda
A
BunduRafiki
L322 Drivers door won't open from inside or outside
Replies
6
Views
449
marjon
marjon
mudmut
Repaint and what to do with chequer plate
Replies
5
Views
946
mudmut
mudmut
Landylady666
Front passenger door on Disco 4 not unlocking with key fob
2
Replies
33
Views
1K
gstuart
gstuart
Back
Top