dave1978ie
New Member
- Posts
- 2
could any 1 please tell me would a axle off a 93 disco 1 fit a 97 disco disco 1
changeing front axle on a disco 1
- Thread starter dave1978ie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Not as a straight swap no
andyb66
Well-Known Member
- Posts
- 1,795
- Location
- Middle of Salisbury Plain, Wiltshire
In what way 'no'?
I suspect that the brake calipers will need swapping (possible discs as well) and the front radius arms may well also be of a different width. Otherwise should work.
Not sure why this is being done as the 93 axle is 10 spline and probably have an awfully slack diff in it
dave1978ie
New Member
- Posts
- 2
i got a 93 disco in the yard that i used to have before and my disco at he moment is a 97 and the front axle is not great in it if the 93 would fit it would be a cheep fit for it as i use it mainly for offroading of a sunday
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
In what way 'no'?
I suspect that the brake calipers will need swapping (possible discs as well) and the front radius arms may well also be of a different width. Otherwise should work.
Not sure why this is being done as the 93 axle is 10 spline and probably have an awfully slack diff in it
So not a straight swap then
Microcat lists completely different part numbers for early & late series 1 discos. That's not to say it won't fit, but it'll need checking and measuring to make sure everything important is in the right place and of the right size.Similar threads
