My central locking does not fully unlock my boot or front doors.
The locks' bolts raise and lower but not enough to let the handles, either inside or out, open the door.
If you use a key in the lock or hand on the bolt you can raise the bolt the 3mm or so required to open the door. (Frustratingly close to the reqired amount)
I have checked the wee coiled springs (previous offered solution in forum ) and they appear to be in place and intact.
Lubrication has made it worse (driver door now needs two tugs on the interior handle; one to move the bolt and one to open)
Servos/solenoids can lock the doors no problem and the rear passenger doors open and close faultlessly.
Any hints from the community?
TIA,
Tana.
The locks' bolts raise and lower but not enough to let the handles, either inside or out, open the door.
If you use a key in the lock or hand on the bolt you can raise the bolt the 3mm or so required to open the door. (Frustratingly close to the reqired amount)
I have checked the wee coiled springs (previous offered solution in forum ) and they appear to be in place and intact.
Lubrication has made it worse (driver door now needs two tugs on the interior handle; one to move the bolt and one to open)
Servos/solenoids can lock the doors no problem and the rear passenger doors open and close faultlessly.
Any hints from the community?
TIA,
Tana.
