Cb

How can I stop the interference from the wipers ?

Do I have to suppress the wiper motor or is there another way ?

try running a clean live from the battery.It cured the interference on mine.

redhand said:

try running a clean live from the battery.It cured the interference on mine.

Click to expand...

I've got one to the aerial mount, had to do that to swr it

Could it be the patch lead ? , it used to run over the door top, got a bit rubbed and a slight kink .

Dent said:

I've got one to the aerial mount, had to do that to swr it

Could it be the patch lead ? , it used to run over the door top, got a bit rubbed and a slight kink .

Click to expand...

why have you a live to the aeriel mount? shouldnt it be a negative earth

johnlad said:

why have you a live to the aeriel mount? shouldnt it be a negative earth

Click to expand...

Fook me , read that as earth been a long day

I'll give that a try.

also you can get filters to fit in the power cable, i did this for my rotel on my tractor, cured the interfearence from the twin beacons

Phil_b said:

also you can get filters to fit in the power cable, i did this for my rotel on my tractor, cured the interfearence from the twin beacons

Click to expand...

Where did you get the filter ? ,

Tried the cb shop but they want £20 plus vat, add fuel to pick it up thats around £30 to stop a bit of noise .

if your still struggling and are on the Wales trip bring everything along and pretty sure between us, we'll get it fitted

johnlad said:

if your still struggling and are on the Wales trip bring everything along and pretty sure between us, we'll get it fitted

Click to expand...

Good idea I might just do that

Don't seem to have much look with them, this is a new one, as on the last trip the only person I could hear at times, was Tim c :doh:

I did'nt know if the gates needed to be shut or open. In the end Tim c was doing hand signals , which was strange.................... as everyone else was doing them at him