- Posts
- 1,855
- Location
- Selby, North Yorkshire
Does anyone have any good idea of what glue to stick carpet on the inside of a 109 Van roof. Must be able to stay stuck even when sunlight heats it up. Thanks in advance.
Carpet glue
- Thread starter Cabbie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Optimus Prime
Well-Known Member
- Posts
- 5,988
- Location
- Garden of England
pop rivets
martin1512
Well-Known Member
- Posts
- 3,941
- Location
- Half way up a cliff in Dorset
Gripfill
- Posts
- 83,310
- Location
- Embasinga stocæ
the_wolf
Well-Known Member
- Posts
- 16,842
- Location
- Stonehouse, Scotland
B&M sell very very good spray adhesive in 500ml cans and its much cheaper than screwfix
Station House
Well-Known Member
- Posts
- 3,960
- Location
- Fife, Scotland
for the roof you need trimfix to withstand the temperature
TRIMFIX HIGH TEMP SPRAY ADHESIVE 2X 500ML. CAR TRIMMING & UPHOLSTERY USE ETC | eBay
TRIMFIX HIGH TEMP SPRAY ADHESIVE 2X 500ML. CAR TRIMMING & UPHOLSTERY USE ETC | eBay
Tis very good stuff, have used it for quite a lot of things - always sticks like concrete provided you follow the instructions on the back.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
It's **** did the 110 back in September. it's all peeling off now gotta redo it all.
Chaps in the unit next to B.B's, do vehicle reupholstering and have recommended this stuff. Woolies Trim - Heat Resistant Adhesive.
Which I am about to order a tin of.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
You usually get condensation on the inner roof would imagine thay all peel in the end
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
You usually get condensation on the inner roof would imagine thay all peel in the end
Not if ya glue a sheet of airtight/waterproof PU closed cell foam matting to it. condensation only forms if there is moisture there in the first place..
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
there all crap..as im in the trade the best stuff is f60 or f61 contact adhesive most sprays arnt upto the weight of the material unless u use the bostick spray gold in 20 litre pressurised containers with hose and gun
- Posts
- 1,855
- Location
- Selby, North Yorkshire
Thanks for all your input. I will look into each suggestion.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
