P38A cant get the key to work on central locking been told till that works i have to use eka code to get the emobiliser to work any one help
- Thread starter dodge man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 43,931
- Location
- Near Poitiers SW France
With Nanocom diagnostics, the EKA code feature and the immobiliser can be turned off, then the car can be operated with the FOB or just the key blade.
- Posts
- 18,962
- Location
- Buckinghamshire, UK. ('95 DT)
Sounds like the microswitches in the lock have gone. There's a test sheet on here somewhere. You cannot enter the EKA with the key if these aren't working.
the EKA code working as it starts now but can program key in
- Posts
- 3,257
- Location
- Near Heathrow.
Is the antenna wire plugged into the RF receiver ? Many people disconnect it to prevent BECM wake-up while parked. Might need connecting to do the key sync (ideally somewhere there's no interference).
- Posts
- 3,257
- Location
- Near Heathrow.
- Posts
- 12,129
- Location
- Sud ouest France !
Under one of the rear parcel shelves, I'll look tomorrow in my scrapper and let you know
brianp38dse
Well-Known Member
- Posts
- 19,585
- Location
- heathrow
Under Drivers side rear shelf by the button to release the seat back the blue wire is the ariel wire
the black box on left of pic.
the black box on left of pic.
- Posts
- 3,257
- Location
- Near Heathrow.
Click my link above. Video shows how to remove panel as well.
thanksUnder one of the rear parcel shelves, I'll look tomorrow in my scrapper and let you know
- Posts
- 12,129
- Location
- Sud ouest France !
Similar threads
