Bushes

Does any body know the part number of the bush that sits in the back of the stub axle on earlier Defenders? the CV joint bit of the drive shaft runs in it and there's an oil seal immediatly behind it. I think it was replaced on later models by a needle roller bearing. Any how I can't find eather on any of the web sites.

dunno Slob, have you got a pic of what your on about?

It's item 6 on Page 52 on here.

http://www.landrover.ee/est/files/manuals/cars/defender/Def_90_110_WSM_book4.pdf

Rimmer Bros. - Product Price Information

is that it? or is that just rimmers number?

G

Please enter title here

Got it!

G

no, i think that last noe is wrong

DA2076: LRdirect.com : Land Rover Parts & Accessories for Defender, Series, Range Rover, P38, Discovery & Freelander

that looks better

Aye I reckon it is. I put it in Craddocks search thingy and it comes up as a stub axle bush. Ta V much.

Bollocks!!! Paddocks have the CV joint on offer but dunt look like they do the bush. Reckon it's part No FRC4319.

ken110 said:

dunno Slob, have you got a pic of what your on about?

Click to expand...

i did have but grunt stole it

Then I et it.

I'm still having trouble finding part numbers can any one help with these

http://www.landrover.ee/est/files/manuals/cars/defender/Def_90_110_WSM_book4.pdf

Item 11 page 47, grease seal.
Item 5 page 52, Intermediate seal, Behind the bush I was on about yesterday.

have you tried yer local bearing and seal factors???
i find they can get most seals and bearings and at a fraction of the cost
just dunt go asking for a landy part, get the number off the bearing or seal and give them that. they'll cross ref the fooker and get you the right bit

Was going to do that and I reckon there better quality but the Grease seal one is I think a special one. Any how I'll go to Swan bearings Tomorrow and see what they've got.

most seals and bearing are a standard size and therefore readily availible from bearing factors...
i once priced a wheel bearing fer a trans am and it wur about 45 quid from rodley motors but only a fiver from the bearing place. so now the first place i go fer bearing,seals and belts is the bearing,seal and belt place