halo
Active Member
- Posts
- 660
- Location
- derbyshire
does anyone know of or has made a bush replacement tool,other than cutting the old one's out and using a vice to fit the new one's?
bush replacement tools
- Thread starter halo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,296
- Location
- Embasinga stocæ
yup
long bolt (3/8 - 1/2")
couple of thick penny washers
old bearing to suit bolt
nut
ring spanners
long bolt (3/8 - 1/2")
couple of thick penny washers
old bearing to suit bolt
nut
ring spanners
halo
Active Member
- Posts
- 660
- Location
- derbyshire
thank's mhm,got a pic of how it work's?
- Posts
- 83,296
- Location
- Embasinga stocæ
foregot to mention - range of sockets to fit bush sizes.
will post piccy later.
will post piccy later.
halo
Active Member
- Posts
- 660
- Location
- derbyshire
ta muchly 
rustyrhinos
Well-Known Member
- Posts
- 2,625
- Location
- Stamford, Lincs
I made this up.
- Posts
- 83,296
- Location
- Embasinga stocæ
that is, more or less, what I have - I just use sockets to push the bush out, and into.
halo
Active Member
- Posts
- 660
- Location
- derbyshire
thank's guy's
i think i get the jist now kinda like fitting riv-nuts yeah?
i think i get the jist now kinda like fitting riv-nuts yeah?
landybird
New Member
- Posts
- 2,858
- Location
- Melksham,Wiltshire
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
wouldn't let no fecker near my bush with that thing
dont knock it till ya tried it hun
halo
Active Member
- Posts
- 660
- Location
- derbyshire
landybird
New Member
- Posts
- 2,858
- Location
- Melksham,Wiltshire
Oddie
AntiSeptic Sandal Wearer
- Posts
- 26,178
- Location
- In a puddle in Kernow
ya not into long screws then
well now i never said that
I think it's the way it goes in, and then pips right out the other side of the box that's scared em off!!!
Full box penetration is never a good thing.
rustyrhinos
Well-Known Member
- Posts
- 2,625
- Location
- Stamford, Lincs
You dirty lot! Only on LZ can you put a whole different meaning into a bush tool!
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
fooking puffs small cold chisel or a large screwdriver is all yu need.
http://www.landyzone.co.uk/lz/f7/done-my-front-radius-arm-bushes-79806.html
Fooking spacers and sockets and strange sex toys. Get a fooking life the lot of ya's
http://www.landyzone.co.uk/lz/f7/done-my-front-radius-arm-bushes-79806.html
Fooking spacers and sockets and strange sex toys. Get a fooking life the lot of ya's
