Bulbs.....
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Can't get bulbs for the window switches as far as i am aware it's either an operation with a soldering iron or you buy the switch pack i think. Illumination bulbs for buttons on dash are all the same i think. STC1877 Orange. STC1878 Green.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 20,130
- Location
- Buckinghamshire, UK. ('95 DT)
Does that go for the ones inside the HEVAC display too? I noticed a while back my bottom lower right corner was a bit dim so I'd better sort it out.
- Posts
- 58,170
- Location
- Preston Lancs.
All the Hevac bulbs can be changed but there are a couple of different ones in there.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 20,130
- Location
- Buckinghamshire, UK. ('95 DT)
Best take some photos and notes when I get around to it then!
Cheers,
J
Cheers,
J
- Posts
- 58,170
- Location
- Preston Lancs.
There are three black T5 holders and a green one for the back light. Also a capless one in the rotary fan speed switch. If you take that off be VERY careful. Use the dots for reference. Squeeze the dial at two opposing dots, pull squarely and gently. If it does not come off go between the dots then to next two dots and so on. Don't be tempted to try and lever it off.
Last edited:
- Posts
- 58,170
- Location
- Preston Lancs.
RTC3635P (aftermarket) capless fan switch, 1 off. STC3868 black holder and bulb, illumination 3 off. STC3869 green holder bulb, backlight 1 off.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 20,130
- Location
- Buckinghamshire, UK. ('95 DT)
Thanks. Best bookmark this page!
