bart2181
New Member
- Posts
- 395
- Location
- birmingham
hello there anyones outer rear window seals bubbling?is there a replacement,are they easy to change or i am i the only bubbly window seal victim
bubbly window seal
- Thread starter bart2181
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
Common fault, mines the same.
Procedure should be on RAVE
Procedure should be on RAVE
paddocks1967
New Member
- Posts
- 341
- Location
- the sunny sooside,glasgow
yep mines the same,maybe best left alone.
overlandrover
New Member
- Posts
- 118
- Location
- Guisborough
err mine's the same
Derek Ward
Active Member
- Posts
- 798
They all do that Sir
lil_gibbo89
Active Member
- Posts
- 137
- Location
- Mansfield
Ill add too this, mines the same 
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
ffs must be only thing thats good on mine lol
klf400
Active Member
- Posts
- 312
- Location
- forest of dean, gloucestershire
:welcome2:yeh mine was the same
so i changed them ,went to a local breakers found a 2000 m/year rangie with good seals on . so removed window lower seal ,one small screw and prized it off. next the problem seal , you need to carefully prize off each side followed by the top, be very carefull a bit heavey handed:5bsmash: and you will kink the metal strip within the rubber this is what rusts under the rubber
they are rather a tight fit so i found some fairey liquid soap helps to get them back into place
be extra carefull on the corners as they are rubber only with no metal inside
as you take them off you need to prize them towards the centre of the window as they fit on very much like a door seal u shaped onto a metal lip
picked my set up for a fiver but i think from landrover they are about £35-£40 per side and they are handed
hope this helps
so i changed them ,went to a local breakers found a 2000 m/year rangie with good seals on . so removed window lower seal ,one small screw and prized it off. next the problem seal , you need to carefully prize off each side followed by the top, be very carefull a bit heavey handed:5bsmash: and you will kink the metal strip within the rubber this is what rusts under the rubber
they are rather a tight fit so i found some fairey liquid soap helps to get them back into place
be extra carefull on the corners as they are rubber only with no metal inside
as you take them off you need to prize them towards the centre of the window as they fit on very much like a door seal u shaped onto a metal lip
picked my set up for a fiver
but i think from landrover they are about £35-£40 per side and they are handed hope this helps
Last edited:
bart2181
New Member
- Posts
- 395
- Location
- birmingham
someone buy this man a drink:welcome2:yeh mine was the same
so i changed them ,went to a local breakers found a 2000 m/year rangie with good seals on . so removed window lower seal ,one small screw and prized it off. next the problem seal , you need to carefully prize off each side followed by the top, be very carefull a bit heavey handed:5bsmash: and you will kink the metal strip within the rubber this is what rusts under the rubber
they are rather a tight fit so i found some fairey liquid soap helps to get them back into place
be extra carefull on the corners as they are rubber only with no metal inside
as you take them off you need to prize them towards the centre of the window as they fit on very much like a door seal u shaped onto a metal lip
picked my set up for a fiver
hope this helps
looks like i,m off to the local landy breaker the weekend.cheers fella
