Broken tie bar

Tell you what i'll put a price together for a set of bushes for joe public,


If you buy the bushes to do your motor, ill happily press them in a spare set of arms I have as they are (not painted or cleaned up) all for the price of a beer, take a quick look over your motor and show you what to look for i.e scrivener ring check and take your old arms once you have swapped them and a review.

Basically if I outlay nothing but a set of arms and pressing them in I'm happy to help.

Win win. It'll probably have to be after payday

No worries if it suits you better can look over the motor before should only take 10 mins basic check as you would do before you compete trialling general condition of vehicle. If you for his before you order bushes then if there is anything else you can get at the same time J

I'm thinking of having a go at replacing my c pillar this weekend, any advice?

I started taking bits off to ease the replacement, when under the sill I found this. There is t one on the other side and I can't see what it does. looks to have sheared off at some point. could it be a mount for rock sliders?

it looks like a side step mount

Why is it when doi g these jobs you just find more problems? The upright between the two floors is shot and the cross member look like it could use a patch.


So I think I will just poprivet the c post on so I can whip it of when I fix all the rest.

has anyone any experience of replacing a C post? something isn't right