breather pipes ?

Iv just fitted a safari snorkel to my defender 90 TD5 iv made a manifold with 5 pneumatic fittings and put in breather pipes from the axles, the gear box and the transfer box where else do i need to run them from.iv seald the ECU unit in an elatrical box is there any other point I need to look at befor going deep.

timing cover? not sure if you should have a vent for the ECU. have you fitted wading plugs? another thing you could do is have a leccy switch to turn off your fan when your wading.

G

Aye wot Griff sed. Wading plugs in timing cover & bellhousing & if as you say yer actually 'going deep' check the seals on your snork by sticking something over the end. the injun should stall. If not, it leaks.

na, i was thinking of breather pipe in THIS timing cover:

http://i138.photobucket.com/albums/q264/Davy_album/Jon/05012007234.jpg

vop's got one on his disco. me and you dunt need it cos our motors are old. but im guessing the TD5 will be the same as the 2/300's.

check out this thread if you wanna learn more...

http://www.landyzone.co.uk/lz/f7/extended-breathers-diy-36721.html?highlight=extended+breathers

enjoy.

G

Oh aye, s'Td5 innit. 'Oles all over the bleedin' things.

Mine's an' 88' RR V8 (probably!), but mated to a III gearbox & int got a bellhousing breather 'ole at all! Lekky fan though which is handy, when I remember to switch it off!

thats the key... remembering to turn it off!

thanks for the replys.had a look and cant see the timing cover breather I think the one in the pic is a 300 tdi.ill look into the plugs.
thanks matt

who the ****s matt?

here yer go: LAND ROVER WADING PLUG.Bellhousing/ Timing cover on eBay, Land Rover, Car Parts, Cars, Parts Vehicles (item 200140772028 end time 14-Aug-07 15:07:50 BST)

G