Kraig
New Member
- Posts
- 64
- Location
- Fife, Scotland
Have a 1999 4.0 P38 im currently breaking, however I have loads of other bits kicking around, e.g 4.6 gearboxes and other 4.6 bits. Need anything just give me a shout.
Breaking Petrol P38 Most parts available
- Thread starter Kraig
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,230
- Location
- Embasinga stocæ
Offside rear lamp holder. EAS tank, EAS compressor lecky plug ( the one on the loom)
Kraig
New Member
- Posts
- 64
- Location
- Fife, Scotland
Is it the rear bulb holder you are needing? Also is the plug you are needing on the compressor side or the body loom side?
- Posts
- 83,230
- Location
- Embasinga stocæ
Rear bulb holder & compressor side plug ( with some wire if ok)
Kraig
New Member
- Posts
- 64
- Location
- Fife, Scotland
No problem, I've got a reservoir tank, however the rear upermost bolt has snapped so will either need to be drilled out or may possibly come out with mole grips, if thats any good?
- Posts
- 83,230
- Location
- Embasinga stocæ
Sounds good to me
Kraig
New Member
- Posts
- 64
- Location
- Fife, Scotland
PM Sent.
- Posts
- 1,478
- Location
- Buckinghamshire.
Have you got a rear bumper mount? I need the left hand side one.
It's the bit that bolts to the chassis that the rear bumper bolts on to.
It's the bit that bolts to the chassis that the rear bumper bolts on to.
Last edited:
Kraig
New Member
- Posts
- 64
- Location
- Fife, Scotland
I'll have a bash at taking it off tomorrow however the chances of it coming off in one piece is pretty slim. New there only about £20, Is this it here?
ANR2500 REAR BUMPER INNER SUPPORT ASSEMBLY | Range Rover P38 1995>: Body/Fittings: Brackets/Fittings | shop | www.lrseries.com | L. R. Series
- Posts
- 1,478
- Location
- Buckinghamshire.
They are £23 new, but they're out of stock everywhere I've tried.
Let's hope yours aren't too bad!
Let's hope yours aren't too bad!
