Breaking Discovery 1 300Tdi ES

Yeah no problem im not in a rush. What do you want for them?

Well the swivel assemblies I usually sell for £50 a side as there are a lot of expensive parts in them. If it's just the swivels and you are happy to dismantle the whole assembly and give me back the cv joints, stub axle and hub assembly then only £15 each.

Sorry but it's a lot of work and mess to dismantle and saves so much effort just to take them off the axle in 1 piece.

Bump

after a turbo reasonably cheap missed 2 auctions on ebay that went for just over £50 each

I have 2 turbos, both good with no smoking.

One is on a manifold that has one good stud, one broken stud and one missing stud. I attached the downpipe using one nut on the good stud and a bolt in the hole and it seemed ok. You could always replace the studs. I would accept £75 for that one.

The other is just as good and all studs are intact. I want £100 for that one.

Bump

Hi how much for the complete lift kit including the radius arms

Hi
Lift kit isn't available and I only have standard radius arms.

If your interested then radius arms are £20 for all 4

Dont suppose you have 3 seatbelt buckles for the rear seats (not dickies) do you?

I know what you mean. I will have a look but I think they have gone already.

I know I had them out when I removed the floor months ago.

Will search tomorrow and let you know.

Hi pal,
Does the discovery have electric seats , if so are the switches in good condition and do you still have them? If so how much for both posted to Blackpool?
Many thanks Ben.

Does it have abs?

If so how much for the sensor wire that goes from the front to the the rear that the rear sensor plug into thanks

If I can find it then £5 inc postage.

I know where it plugged into at the back, where is it plugged into up front?

Im not sure. I know it runs down passenger chassis rail. And when I was welding up the bulkhead I seen the conduit coming next to the front outrigger and goes in the engine bay somewhere.

Hi, have you got a drivers door, all working, colour and condition, within reason, does not matter too much.
Dave

Russ81 said:

Im not sure. I know it runs down passenger chassis rail. And when I was welding up the bulkhead I seen the conduit coming next to the front outrigger and goes in the engine bay somewhere.

Click to expand...

I'll have a look for it. I have ripped out the loom so it will be somewhere.

axledeep in a V8 said:

Hi, have you got a drivers door, all working, colour and condition, within reason, does not matter too much.
Dave

Click to expand...

I do have a door complete with glass and handle. Was all working. Panel not great with green laning scratches and a little crease where the check strap was broken.

All yours for £25 (excluding door card and speaker)

Brian S said:

I'll have a look for it. I have ripped out the loom so it will be somewhere.

Click to expand...

Cheers Brian you'll be a life saver if you can find it.

I found the wire but it had been cut in the engine bay.

I removed the loom to weigh it in so probably cut the wire at the time.

Sorry.

No problem. Don't suppose there is a part number on it somewhere?