Breaking Discovery 1 300Tdi ES

I have decided to break one of my Discoveries since its not in a state to sell for what I would want for it.

I am keeping the wheels and suspension for my new winter Disco.

It is the ES version with Grey electric leather seats in great condition.

although the Engine is sound it does throw up the CHECK ENGINE light in low RPM, so despite a recent cambelt and service I have decided to break it as well.

Recently fitted new drivers side swivel and CV joint.

Rest of mechanics are good.

Auto Box is fooked to not selling that.

Panels have scratches and marks from green lanes, but I do have spare doors and front wings in better condition.

Colour is Dark Grey.

PM me for parts needed.

How much for the passenger rear door and rear panel on a pallet to Swansea ? I take it there is no damage to either?

The passenger rear door is good. It doesn't have the same side trim as shown in the pic it is from a donar landy I brought in the same colour.

Do you want a complete door minus door card or a stripped door with no glass, motors or handle?

Just a bare door, just bought one in the same color with a huge scratch in those panels

Well I have the door but I wish you were closer. I am not a business and work from home. I have no pallets or strapping and sending the door would be a pain.

I don't mind sending things by carrier but this could end up arriving damaged and cost me more in time and effort to send than I would make on the door.

No problems, best of luck!

Cheers.

What about the cup holder that pops out from under the dash?

That is there and works well.

£10 inc p&p

what state is the suspension springs & shocks front and rear in? and a price
I'm in Colchester so not far away,
bemmy

Hi. If you want a standard set they are in good condition.

how much for the front & Rear shocks & Springs?

Bemmy

I need the big oval harness grommet that goes in the front bulkhead , you will most likely need to chop the harness to get it off without damage , if you have PM with price including RM 1st class postage ? best rgds

Bemmy said:

how much for the front & Rear shocks & Springs?

Bemmy

Click to expand...

The standard set if shocks and springs would be £50 collected.

tacr2man said:

I need the big oval harness grommet that goes in the front bulkhead , you will most likely need to chop the harness to get it off without damage , if you have PM with price including RM 1st class postage ? best rgds

Click to expand...

I am most likely going to chop the loom as I usually weigh it in unless anyone needs a complete loom. I should be able to get the plugs through it though.

What size tyres are they and how much? Also how much for the complete lock set, the drivers, passenger and rear door locks with keys and the fuel cap, maybe ignition if you can get that as well.

Brian S said:

The standard set if shocks and springs would be £50 collected.



I am most likely going to chop the loom as I usually weigh it in unless anyone needs a complete loom. I should be able to get the plugs through it though.

Click to expand...

That would be good , as I need it without the centre sleeve part split , pm me as soon as is available , can pay you via paypal if thats OK

how much for the snorkel? and CB arial?

would it have a rear prop (4 bolt type)

Snorkel and cb are being fitted to my other landy.

The rear prop is standard doughnut type.