Break calibration on a freelander is it true or false

Windsock · Apr 23, 2013

Had the 3 lights on the dash on my freelander xedi put a salvage power steering pump on and had the lights cleared at my local garage (HOBSONS) the best customer service I have ever had and cheap to so it all helps , anyway getting back to the lights. Cleared two and a half weeks ago and they can back on. I phoned landrover at chesterfield and asked how much to clear the lights, the reply was £84+vat I said that already had them cleared 2 weeks previous , then he said they may need re-calabrating or recoding to the freelander could any one tell me is this TRUE or FALES::tea:

gemsdad · Apr 23, 2013

Windsock said:
Had the 3 lights on the dash on my freelander xedi put a salvage power steering pump on and had the lights cleared at my local garage (HOBSONS) the best customer service I have ever had and cheap to so it all helps , anyway getting back to the lights. Cleared two and a half weeks ago and they can back on. I phoned landrover at chesterfield and asked how much to clear the lights, the reply was £84+vat I said that already had them cleared 2 weeks previous , then he said they may need re-calabrating or recoding to the freelander could any one tell me is this TRUE or FALES::tea:

ask this again in the freelander section.

Optimus Prime · Apr 23, 2013

from the information being give, sounds like a bit of a lie to me.

also, changing the power steering pump would have no effect what so ever on the three amigos warning lights which relate to the braking system, abs and hill descent control.

Windsock · Apr 24, 2013

Sorry meant to say abs pump or module if that is what is called.

wiltshire landyman · Apr 24, 2013

It's the overcam sprocket release mechanism that is at fault

Optimus Prime · Apr 24, 2013

possibles are brake light switch, common cause and cheap fix,

or

one of the 4 abs sensors

Windsock · Nov 16, 2019

It was the shuttle valve switch that has a bad earth in the abs module same happens on the discovery

Nodge68 · Nov 16, 2019

Windsock said:
It was the shuttle valve switch that has a bad earth in the abs module same happens on the discovery

Wow. A 6 year old follow up, that must be a record, thanks for following it up.

Ratae · Nov 18, 2019

Better than the umpteen thousand on various websites that just can't be arsed.

Break calibration on a freelander is it true or false

Windsock

Member

gemsdad

NOT BOTHERED.

Optimus Prime

Well-Known Member

Windsock

Member

wiltshire landyman

I’m back

Optimus Prime

Well-Known Member

Windsock

Member

Nodge68

Well-Known Member

Ratae

Well-Known Member

Similar threads