mickr
New Member
- Posts
- 30
- Location
- milton keynes
hi my p38 dse has developed brake shudder,any ideas to save me buying this that,ie wasteing money on parts i dont need ,thanx.
yes checked all wheels on sat when put origanals back on to see if that was the cause,all ok clean,have you checked to see if there is any contamination on the brake surfaces.ie oil etc.
plenty of meat on them,nearly new,6months,have a look at the pads first..
just appeared,2 weeks ago.has the judder just started sudden,or has it been getting steadily worse.???
just appeared,2 weeks ago.
yes,very bad on heavy braking,can you feel any pulsing through the steering wheel at all.
yes,very bad on heavy braking,
thanx for your replies,i shall get new set and post result,i thought it would be abs or something more exspensive,thanx again,heres hopeing.warped discs mate
thanx for your replies,i shall get new set and post result,i thought it would be abs or something more exspensive,thanx again,heres hopeing.
i will see our fitter to check them ,thanx,will post replie when done,before you go out spending your hard earned,can you get hold of a dial gauge to check the disc runout,check the pads to make sure that they are not breaking down etc.
i will see our fitter to check them ,thanx,will post replie when done,
if they are what i think they are,they look ok,no splits in rubbers,but check again for looseness,thanx,Discs most likely but check the drag link mine did it and the drag link was part of the problem just an idea
hi,had fitter finaly check discs,he condemed them,so new ones ordered,thanx again for your replies ,mick,before you go out spending your hard earned,can you get hold of a dial gauge to check the disc runout,check the pads to make sure that they are not breaking down etc.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!