P38A Brake line replacement which fittings

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Littelwill

Littelwill

Well-Known Member
Posts
3,065
Location
Lincolnshire
Ive done a search but can't find it. What size is the brake line and which fittings do I need to do the whole job? Got the flaring kit and wanted to get the job done this weekend so need to go grab the fittings today.

W
 
Littelwill said:
Ive done a search but can't find it. What size is the brake line and which fittings do I need to do the whole job? Got the flaring kit and wanted to get the job done this weekend so need to go grab the fittings today.

W
Click to expand...
3/16" brake line. Tube nut thread 10 x 1 mm.
 
Littelwill said:
I've got the nickel stuff and my pipe bender cutter thingy. Just need to locate these nuts
Click to expand...

Any motor factor should have them. Halfrauds have them but pretty expensive compared to the trade prices i pay. Male, female and female/female if you are jointing is what you need. Usually a double flare when using a female tube nut on a male fitting and single flare for male nuts into a female fitting.
 
Grrrrrr said:
Just looking at this myself. How many did you use and how much brake line did you need?
Click to expand...

Don't get into that. Like the bloke who asked the fellow next door who had just papered his front room as his house was the same size, how many rolls of paper did he get. The bloke said, " fifteen". An few weeks later the bloke sees the other guy and says, "You said you got fifteen rolls of paper so i got fifteen, but i had three left over. The other bloke says, "Yeah so did i".
 
wammers said:
Don't get into that. Like the bloke who asked the fellow next door who had just papered his front room as his house was the same size, how many rolls of paper did he get. The bloke said, " fifteen". An few weeks later the bloke sees the other guy and says, "You said you got fifteen rolls of paper so i got fifteen, but i had three left over. The other bloke says, "Yeah so did i".
Click to expand...

Planning but hoping not to have to get under the car on a wet night!
 
tomcat59alan said:
Noooooo, it's water we are short of. Plenty of Scotch and Dry, and the missus cannot drive for at least another couple of weeks after her shoulder opp.:(:D
Click to expand...

Is Agnetha the eighteen year old blonde Swedish driver you got from the agency not helping out. Our have you got her on other duties? :D
 
You must log in or register to reply here.

Similar threads

Mph007365
Eas valve block rebuild
Replies
6
Views
934
Datatek
Datatek
H
For a good laugh ...
Replies
7
Views
778
dag019
dag019
Tango91
Disco 2 D2 Brake hard line and fittings size?
Replies
10
Views
2K
tilly2
T
K
Help with weird electrical fault which affects starting and brake lights?
Replies
6
Views
333
GrumpyGel
GrumpyGel
nevillen
L322 lower suspension arm replacement
Replies
8
Views
1K
Shippers
Shippers
Back
Top