forgot to tel that 3 amigos are with me...
From a quick look at the diagram for the later vehicles -I have test the switch...
pin 1 and 3 in contact when not press
pin 1 and 2 in contact when half press
pin 1, 2 and 3 when full press...
is it OK
Hi GG, I missed the link from header 0287 back to the ECU (the one from pin 3 !)So Pin 1 is the feed from Fuse 2.
"at rest", only Pin 2 should be live.
When open a little, both Pin 2 & Pin 3 should be live.
When fully open, only Pin 3 should be live.
Have you checked the high level brake light and it's wiring. I've seen the wires pinched in the fitting in the past.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!