Bonnet removal
- Thread starter StuRox
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
4 bolts, 13mm iirc, lift off, lift on.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Sorry.
Probably best to take it to a dealer for a week.
Probably best to take it to a dealer for a week.
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Just loosely tighten it up, close, see what alignments like..repeat to death...give up. Drink beer.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Luke: Its impossible.
Yoda: That is why you fail.
Yoda: That is why you fail.
Lol, sounds like most jobs I have done recently....then try and solve it Sunday as need it on Monday....
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
The Force is strong with this one :mil50:
Suris
Banned
- Posts
- 757
- Location
- Under a very large stone.
Don't really think that comes into the equation with Landys mate
Best bet to get it near right is to make sure the washers on the bolts fit back to the original marks left on the hinges.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Wot Strom said re aligning just nip up the bolts and close the bonnet then check ya have equal gaps between bonnet and wings. If ya want you can draw round the washers before ya undo the bolts.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Don't really think that comes into the equation with Landys mate
Best bet to get it near right is to make sure the washers on the bolts fit back to the original marks left on the hinges.
Nah .. just **** it with a hammer
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Those will be the washers that disappear into the engine bay never to be found when you loosen the unloosenable 13mm bolts.
Suris
Banned
- Posts
- 757
- Location
- Under a very large stone.
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
****! forgot to mention that bit
It's how I've been fixing most of my problems with the series, hit it til it co-operates and if it dont after a good smack then heat it, grind it or hit it some more
On a disco you might damage your paint work though so a rubber mallet could be better
Suris
Banned
- Posts
- 757
- Location
- Under a very large stone.
If the guru's reading this lot he'll be frothing at the mouth by now.
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Which gnu? Who gnu?
Similar threads
