bonnet alarm switch

My alarm was going off all the time,the bonnet was the problem.I took it out and cleaned it and all ok so far.
I looked online at how to get it out and looked at the book,it sounded a pig of a job so I had a good look at it and find if you take the right head light out, you can jiggle the two clips at the front of the switch in and that's it easy.
I hope this helps people out

The FL2 reports the cause of the last triggered alarm int dash menu. If yer use the fob to trigger the panic alarm option then stop it, it will record this as the last trigger. This will help diagnose problems as the recorded trigger will change again if the alarm goes oft again.

lord hippo
the thread was just to help people to take out and clean or replace the bonnet switch.