compoundbill
New Member
- Posts
- 25
- Location
- Kendal
Bits of something in engine
- Thread starter compoundbill
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
compoundbill
New Member
- Posts
- 25
- Location
- Kendal
please ignore the broken drill as this was also inside the engine
ta
ta
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
Looks like 6 rivets and a broken drill bit to me!
- Posts
- 83,296
- Location
- Embasinga stocæ
:hysterically_laughi
well....
one is a drill bit (or part thereof)
the others look like the rivets which hold the timing cover oil seal in.
not good tho. looks like someone did the job in situ
.
well....
one is a drill bit (or part thereof)
the others look like the rivets which hold the timing cover oil seal in.
not good tho. looks like someone did the job in situ
.compoundbill
New Member
- Posts
- 25
- Location
- Kendal
that will explain why the the oil seal cover is on with screws from electrical sockets then.
i only paid £34 for it and i am stripping it down.
i only paid £34 for it and i am stripping it down.
- Posts
- 83,296
- Location
- Embasinga stocæ
the Rave manual tells ya to replace with self tapping screws.
but not to push the crap into the sump tho!.
but not to push the crap into the sump tho!.
compoundbill
New Member
- Posts
- 25
- Location
- Kendal
Thanks for your help, i have now found all 8 of the rivets
dr pepper
New Member
- Posts
- 1,438
- Location
- lancashire
Might be worth leaving a magnet in the sump just i case something else in there manages to stay in.
compoundbill
New Member
- Posts
- 25
- Location
- Kendal
Thanks guys.
The engine is being stripped down and rebored and having hardened valve seats, crank regrind.
hopefully i will find any more bits the last owner left in there.
The new pistons valves seal and full gaskit set along with new valve guides have arrived this morning. just have to find the size of the main and shell bearings and order new. Although the big ends i have removed look like new. but the numbers on these don't relate to any number in my parts catalogue the numbers are 534490 any idea what these sizes are?
thanks
The engine is being stripped down and rebored and having hardened valve seats, crank regrind.
hopefully i will find any more bits the last owner left in there.
The new pistons valves seal and full gaskit set along with new valve guides have arrived this morning. just have to find the size of the main and shell bearings and order new. Although the big ends i have removed look like new. but the numbers on these don't relate to any number in my parts catalogue the numbers are 534490 any idea what these sizes are?
thanks
