Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
I have a brand new Borg and Beck V8 clutch from my R380, it'll come with everything from release bearing to clutch pressure plate £80
Winch tray for all Superwinches (weld in but can put mounts on it) £50
Flapper EFI with 89k on the clock! Real nice inside still a very light tan colour rather than black and nasty. Its got a new dizzy cap, arm and leads as well as plugs.
Comes with;
Spare inlet manifold
Spare water pump (OEM)
Spare air filter
Fuel pump
Labeled wires so you can plug it straight in
ECU
Three spare resistor packs
Spare wiring harness
Exhaust manifolds are all intact with no stripped bolts as I replaced the gaskets properly using loctite paste
New thermostats been put in (Waxstat)
New pump gasket
New oil and filter too
One spare pair of good late 3.5 heads
Video of it running and revving a little
http://www.facebook.com/photo.php?v=...20167612301460
I'm thinking about £375 OBO for it with all the spares, can help load up or deliver if local!
Stumpy R380 (brand new refurb)
Need to sell this as its now surplus to requirements after pouring a good amount of cash into the box and hours of labour
This box was rebuilt by AW Transmissions and was going to be used in my own build, it has new bearings, the teeth are perfect, new synchros and new oil seals.
All parts on the box are brand new and its ready to fit with the stumpy release bearing. (see pics)
I'll also supply this box with a near new 24 spline clutch and HD arm! Clutch has covered 3000 miles and is perfect
The input shaft has been machined down to fit a V8 but I will supply the box with a roller bearing spigot bush that fits the crank and shaft!
Perfect if your LT77 is FUBAR, you're making a hybrid and need to save space or you want a 5 speed set up in a series landrover as this is pretty short!
£675 OBO palleted is my price as a lot of works gone into this box!.......Ashcrofts price is £1194.00 for this just so you're aware.......
Brand new R380 V8 bellhousing up for sale soon, I bought this with my recon box from AW Transmissions for use in my project but things have taken a new direction
£65 plus postage, will come complete and ready to fit with clutch pivot etc
V8 pinion shaft, again brand new as the box hasn't even been filled with oil yet
£60 plus postage
Series three heater box with fan and matrix in good condition £60 all in ?
Mud Stuff dash £25 + post
Honda S2000 race raditor (will fit in RV8 place and cool it) Brand new £40 plus post
Jaguar 4.0L rad again brand new will cool any of the V8's or literally anything and about the same width as standard V8 rad £85 plus post
KC Daylighter 150 spotlights these things are crazy bright! £150
Winch tray for all Superwinches (weld in but can put mounts on it) £50
Flapper EFI with 89k on the clock! Real nice inside still a very light tan colour rather than black and nasty. Its got a new dizzy cap, arm and leads as well as plugs.
Comes with;
Spare inlet manifold
Spare water pump (OEM)
Spare air filter
Fuel pump
Labeled wires so you can plug it straight in
ECU
Three spare resistor packs
Spare wiring harness
Exhaust manifolds are all intact with no stripped bolts as I replaced the gaskets properly using loctite paste
New thermostats been put in (Waxstat)
New pump gasket
New oil and filter too
One spare pair of good late 3.5 heads
Video of it running and revving a little
http://www.facebook.com/photo.php?v=...20167612301460
I'm thinking about £375 OBO for it with all the spares, can help load up or deliver if local!
Stumpy R380 (brand new refurb)
Need to sell this as its now surplus to requirements after pouring a good amount of cash into the box and hours of labour
This box was rebuilt by AW Transmissions and was going to be used in my own build, it has new bearings, the teeth are perfect, new synchros and new oil seals.
All parts on the box are brand new and its ready to fit with the stumpy release bearing. (see pics)
I'll also supply this box with a near new 24 spline clutch and HD arm! Clutch has covered 3000 miles and is perfect
The input shaft has been machined down to fit a V8 but I will supply the box with a roller bearing spigot bush that fits the crank and shaft!
Perfect if your LT77 is FUBAR, you're making a hybrid and need to save space or you want a 5 speed set up in a series landrover as this is pretty short!
£675 OBO palleted is my price as a lot of works gone into this box!.......Ashcrofts price is £1194.00 for this
just so you're aware.......
Brand new R380 V8 bellhousing up for sale soon, I bought this with my recon box from AW Transmissions for use in my project but things have taken a new direction
£65 plus postage, will come complete and ready to fit with clutch pivot etc
V8 pinion shaft, again brand new as the box hasn't even been filled with oil yet
£60 plus postage
Series three heater box with fan and matrix in good condition £60 all in ?
Mud Stuff dash £25 + post
Honda S2000 race raditor (will fit in RV8 place and cool it) Brand new £40 plus post
Jaguar 4.0L rad again brand new will cool any of the V8's or literally anything and about the same width as standard V8 rad £85 plus post
KC Daylighter 150 spotlights these things are crazy bright! £150
