BF AT KO2 265 75 R16 tyres on my 300 TDI 90 CSW

Picked up a brand new set of five at billing as I recently discovered that the ones on mine are original KOs (not 2s) dated from late 2002 so are dangerous to use now being 20 plus years old.

The ones on right now are 235 85 R16 but the ones I bought are 265 75 16

Am i going to run into any issues here with size?

I hope not as i spent almost a grand on them. I have been waiting 7 weeks for General Grabber AT3s to arrive with no luck. They just don’t seem to be shipping at all.

They will fit on the rims no problem, there is a small difference in size (hieght/diam)

What rims do you have? BFG say you need min of a 7" wide rim for a 265/75.

They are exactly what i have just fitted to mine. I hvae 8" wide rims however as @300bhp/ton mentions above you need at least 7 so they cannot be fitted to standard or HD (wolf) rims. This is my third set of BFG At's in this side and have had no issues with any of them.

dag019 said:

They are exactly what i have just fitted to mine. I hvae 8" wide rims however as @300bhp/ton mentions above you need at least 7 so they cannot be fitted to standard or HD (wolf) rims. This is my third set of BFG At's in this side and have had no issues with any of them.View attachment 292016

Click to expand...

I have Boost alloys more worried about them catching on full lock

They will fit just fine (1.1 inches wider), slight speedo change etc

Just fitted same to myne, i fitted myne with white lettering on inside, personally i hate the "jeep wrangler' look.

I confirmed with Michelin ( BF Goodridge are made by Michelin) tyres are symetrical so choice is yours.

KISSMYAURA said:

They will fit just fine.

Just fitted same to myne, i fitted myne with white lettering on inside, personally i hate the "jeep wrangler' look.

I confirmed with Michelin ( BF Goodridge are made by Michelin) tyres are symetrical so choice is yours.

View attachment 292038

Click to expand...

I like the white writing lol

ryan_1993 said:

I have Boost alloys more worried about them catching on full lock

Click to expand...

adjust your stop bolts if it s a worry!, Myne are on Zu Alloys

ryan_1993 said:

I like the white writing lol

Click to expand...

lol your truck your choice buddy,

I dont understand why peeps get into bun fights about choice, what ever you wanna do is fine with me and i got no probs helping you to do it, just cos its not for me dont mean i have to be a dick about it!

tyre size vizualiser / comparison

tyre size comparison site

KISSMYAURA said:

Just fitted same to myne, i fitted myne with white lettering on inside, personally i hate the "jeep wrangler' look.

Click to expand...

I didn’t get a choice that is how the tyre place fitted them to the rim. Like I said my third set and in my experience unless you actively repaint it the white lettering rubs off in about 12months if you use your Land Rover for Land Rover things rather than for the school run.

All fitted

Looks smart.

Myne just balanced n flipped.

dag019 said:

I didn’t get a choice that is how the tyre place fitted them to the rim. Like I said my third set and in my experience unless you actively repaint it the white lettering rubs off in about 12months if you use your Land Rover for Land Rover things rather than for the school run.

Click to expand...

According to BF godridge it does'nt, its white rubber moulded into the side wall, so cant be rubbed off? maybe they telling porki pies....

Well, if so, it's a very thin layer of white rubber, which can easily be scuffed off if you park close to kerbs.

Brown said:

Well, if so, it's a very thin layer of white rubber, which can easily be scuffed off if you park close to kerbs.

Click to expand...

cheeky buggars, they reckon its through and through not a layer lol

Kerbing might well destroy the outter sidewall and writing. But the white lettering shouldn't rub off in normal use, not even off road.

KISSMYAURA said:

Myne just balanced n flipped.
View attachment 292164

Click to expand...

Is that an air scoop on your wing Mr Kiss ?
And a snow cowl, on the blank wingtop inlet ?

miktdish said:

Is that an air scoop on your wing Mr Kiss ?
And a snow cowl, on the blank wingtop inlet ?

Click to expand...

it is indeed, always had the scoopy so cannot say if it does very much other catch mice and low flying birds,
The NSF wing felt left out on the snowcowl front so give it one to keep it quiet!

you may have noticed the terrafookwits hubs, they going soon as well, they corrode like a fiat at the seaside ie you can watch it in real time fizz!