Best way to noise insulate a 90?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

Annietulip

New Member
Posts
2
Does under bonnet insulation work. What is best type / make if it does ?
Any other areas that are relevantly easy and worth doing?

Any advice great fully recd.
 
I would say under bonnet and bulkhead and floor needs to be soundproofed.

Had a look at mine today, don't know what is best to use though, it needs to be some sort of thick stuff though. I once stripped an old BMW and they had used thick rubbery stuff but not dense if you know what I mean, had cavities in it.

Got to be cheap anyway:)
 
Be careful what you use, as if its open cell or material then it will soak up water and cause rust.

Ive found the best method is 3mm - 10mm closed cell foam (water tight) covered in speaker carpet 2/3mm rubber.


Most noise comes from the front bulkhead, a pillars and doors.
 
Hi, good idea,will try scrap yard for insulation cast offs! May work, won,t cost much if doesn't, thanks again. :)
 
7ara9ury.jpg
 
I used Dynamat and it worked well. On this inside of the door panels and inside the center console tunnel (automatic).
 
You must log in or register to reply here.

Similar threads

SNOman
How to: de-ASBO my old V8
2 3
Replies
44
Views
2K
6pot
6pot
JoeCoutz
TD5 90 2006, loss of drive. No gears work.
Replies
4
Views
372
Spudgun!
S
dag019
LT77 clicking loudly in 5th gear
Replies
7
Views
842
Skolmate
Skolmate
D
What loom would be best for my landrover 90 thats now running a 300tdi
Replies
14
Views
1K
deccyb
D
L
WHERE TO BUY A AN EARLY DISCOVERY 1 HEATER FAN??
Replies
0
Views
298
lrjohn
L
Back
Top