best bulbs for lr90

does anyone know what could be the best replacement bulbs for otherwise wax candles. 85 lr90

try a halogen covertion, ****part do some, or do a search and find things like this..............

http://www.landyzone.co.uk/lz/f31/110-headlight-26829.html

Ah did mine and it makes a hoor o' a diffrunce

Hi folks, the wiring diagram below, is for a generic headlight wiring loom up grade and will work for both positive and negative switched headlight systems.

If the new loom is made to the diagram’s set up and connections made to the vehicle’s existing headlight sockets, then there will be no need to cut into or alter the vehicle’s wiring in any way.

Once the new loom is installed, the vehicles headlight globes will now be positive switch no matter what polarity the vehicle’s headlight switch work by.

The reason for using 4 single pole relays instead of 2 double poled headlight relay is to increase safety. If standard double poled headlight relays are used and a fuse blows or a relay fails, you can loose either both low beam or both high beam at the same time.
By using 4 single pole relays, if a fuse blows, you will only loose 1 high beam AND 1 low beam, or if a relay fails you will only loose either 1 high beam OR 1 low beam.
This is a much safer way to operate the headlights.

The 4mm2 Automative wire is way above what is needed but by using the heavier cable, and by running an earth wire from the headlight globe all the way to the battery, the standard headlights should be brighter and slightly whiter. By about 150% only.

With this set up, the relays are protected by the vehicle’s existing headlight fuse but the current that is required to operate the headlights via the vehicle’s headlight switch is now about 1/50th of what was needed before the new loom was installed and this should considerably extend the operating life of the vehicles headlight switch.

Once all the wiring is in place and the lights have been tested, all the new cable should be protected by housing it in split tube and securing the tube by way of wire tires.

Picture of diagram to follow. I just need to find out how to attach it to this mail. It keeps asking for http/?.......

look in the general questions section - how to attach pics

mornin daft

mornin Slob - dint see ya hiding down here

Thanks for that. I read somewhere about people putting bmw lights in ???

Don supposed anybody knows if they should be sealed beam or bulbs in a lr90 march 1985 2.25DNA its van type.

GrahamT said:

Thanks for that. I read somewhere about people putting bmw lights in ???

Don supposed anybody knows if they should be sealed beam or bulbs in a lr90 march 1985 2.25DNA its van type.

Click to expand...

Try summit like this for example
RTC4615K Halogen headlamp conversion kit (RHD)
or this
PM678 Wipac Crystal Halogen Headlamp Conversion Kit (pair)
or this
RTC4615K Halogen headlights - pair RHD to 94MY -to KA922614

daffodils

muddythelandy said:

daffodils

Click to expand...

Daffs may be fine bulbs. however as of this morning matrix leeks.

Thanks for all the info everyone.